Following on from the award-winning versions for Prepar3D and X-Plane, this highly detailed simulation of the PA-28R Turbo Arrow III and Arrow IV now comes to AeroflyFS 2.
The PA-28R Turbo Arrow III and Arrow IV are four seater, turbocharged piston-engine aircraft equipped with a retractable tricycle landing gear and constant-speed propeller – ideal for touring and instrument training.
First available in 1977, the Turbo Arrow III was the first turbocharged variant of the PA-28R Arrow, retaining the conventional tail of the Arrow III and a new cowling which housed the six-cylinder turbocharged engine. The Turbo Arrow IV followed in 1979 and featured the distinctive T-tail which was common amongst other Piper aircraft.
The aircraft are flown all around the world and this add-on reflects that global popularity. The product features ten liveries from the USA, UK, Germany, Australia, Switzerland, Austria and the Czech Republic.
MODEL
-
Accurately modelled PA-28R-201T Turbo Arrow III and PA-28RT-201T Turbo Arrow IV, built using real-world aircraft plans following comprehensive, hands-on research with a real-life Arrow III, G-BGKU, based at Conington Airfield
-
Numerous animations, including multi-animation passenger door, cockpit window and sun visors
-
4096 x 4096 textures are used to produce the highest possible texture clarity
-
Bump, specular, reflection and ambient occlusion mapping used throughout the aircraft for a truly 3D feel
COCKPIT
-
A truly 3D virtual cockpit right down to accurately modelled seat belts and screw heads - every instrument is constructed fully in 3D with smooth animations
-
Cockpit textures feature wear and tear based on reference photos taken in the real aircraft to produce an authentic environment
-
Different colour schemes for the Turbo Arrow III (grey/blue) and Arrow IV (tan/brown)
-
Functional and comprehensive IFR-capable avionics fit including:
- KMA 20 audio selector unit
- GNS 530 unit including COM 1 / NAV 1 function
- KN 62 DME unit which can display information from NAV 1, NAV 2 or its own inbuilt receiver (NAV 3)
- Autocontrol IIIB autopilot unit with navigation, heading and roll hold
- KT 76A transponder unit
- KR 85 ADF unit with ADF/ANT/BFO modes
- KX 175B COM 2 / NAV 2 radio
-
Yoke-mounted flight timer/clock
-
Independently operated left and right (standby) altimeter
AIRCRAFT SYSTEMS
-
Custom-coded fuel system
-
Custom-coded electrical system with functional circuit breakers
-
Realistic landing gear system with emergency release
-
Functioning alternate air and static source controls
LIVERIES
The Turbo Arrow III is supplied in the following five paint schemes:
-
N48427 (USA)
-
D-ERMT (Germany)
-
G-OBAK (UK)
-
HB-PMB (Switzerland)
-
VH-LLA (Australia)
The Turbo Arrow IV is supplied in the following five paint schemes:
-
D-EAIV (Germany)
-
G-BOGM (UK)
-
OE-KFT (Austria)
-
OK-MAN (Czech Republic)
-
N3023K (USA)
OTHER FEATURES
-
Realistic flight dynamics based on real world performance and handling data
-
Authentic sound set by Turbine Sound Studios (TSS)
-
Custom sounds for switches, doors, gear warnings and more
-
Comprehensive manual with panel guide and performance data
"Two superb aircraft... Pin-sharp liveries... The airframe construction is meticulous from any angle you care to choose... The Just Flight team has reinforced its promise to produce high-quality products, which are developed with superb attention to visual and mechanical detail"
(PC Pilot Classic Award, 90/100)
System Requirements:
-
Aerofly FS 2 (PC & Mac versions)
-
Dual Core CPU 2.4GHz
-
4GB RAM
-
1GB graphics card
-
Windows 10 / 8 / 7 (64-bit versions) or MacOS 10.13 or higher
-
300MB hard drive space
US$42.99
In Stock
Earn up to 140 
points.