Support
FAQs for Constellation Professional
Updates for Constellation Professional
FAQs
Is the Constellation compatible with FS2004?
Unfortunately the Constellation Professional is only compatible with FSX
Updates
Constellation Service Packs
Base pack:
This update should be installed by users of the Constellation Professional download and users of the DVD versions (English, US and German)
Ailerons pivot point operation revised.
Pop-up engine instrument panel now incorporated (SHIFT + 4 to show/hide) that shows:
BMEP
Fuel Flow
Cylinder Head Temp
RPM
Manifold Pressure
Vertical speed indicators now showing correct value.
BMEP gauges now operating.
Fuel flow gauges operating correctly.
Incorrect clocks reading - fixed.
Needles on all clocks were inverted - fixed.
Missing number 1 engine fire lever red lamp found.
CHT gauge for engine 4 now operating.
CHT gauges indication range corrected.
Engine primer selector issue fixed.
Airspeed indicators not showing correct value - fixed.
Engine start-up smoke and exhaust flame effects now operating.
The co-pilots ground handling switch visual operation fixed.
All altimeters now have a pressure setting window.
Certain passenger cabin transparency issues corrected.
The superchargers knobs were painted red - now black.
Rotating beacon now off when master switch off.
The suction indicator was always at zero - fixed.
Spelling error of "CARBURETTER AIR HEAT" on Flight engineer console - fixed.
Rudder pedals were too large and ‘collided’ with the warm air hoses - fixed.
No pitot heat switch, leading to pitot tube failure - fixed.
Airspeed indicator on co-pilots side and engineers panel don’t function - fixed.
No tooltips on ADF radio gauge - fixed.
Update for Constellation Professional Base Pack: 28.2Mb
Add-on packs.
This update should be installed by users who have purchased either Constellation Professional Expansion Pack A or Constellation Professional Expansion Pack B from the DVD or as a Download. Users of the US or German versions should also install these updates.
Please install the base pack update prior to installing these updates.
Engine start-up smoke and exhaust flames now operating.
Incorrect clocks reading - fixed.
Engine primer selector issue fixed.
Eyebrow windows now show correct glass in all L749 series models
Certain external model pilots textures now present
CHT for engine 4 now showing correct needle position.
Update for Constallation Professional Expansion Pack A: 38.2Mb
Update for Constallation Professional Expansion Pack B: 67.1Mb
Paintkit for Expansion Packs
This update will add a Paintkit for the L1049 variant that comes with the expansion packs for the Constellation Professional.
Installation:
Once the update has downloaded, click on the file to run the update and then follow the on-screen instructions.
File size:82Mb
The paintkit is located in your Flight Sim X directory > Just Flight > Constellation
Contact technical support
If your query is not answered in the FAQs or updates above, please contact us via the Support Request form by clicking
here
If your question is likely to be helpful to other users, we’ll post the details here.
